Logos, house numbers, nameplates and keychains are the second big "image to STL" job. The goal is different from a lithophane: crisp edges you can see in normal light, built from flat raised shapes rather than shades of gray. The shortcut is to extrude a PNG directly. The cleaner route is to trace the PNG to a vector first. This guide covers both.
Route one: extrude the PNG directly
If the logo is a simple, high-contrast shape on a plain background, a direct extrusion is fine. Upload it to ImageToStl.com and choose Extrude, which traces the edges it finds in your image and builds a solid, or use 3DPEA image to STL in Extrude mode, where you can also add a border and a base thickness. 3DPEA's color extrude option keeps each color as a separate part, which is useful for multi-color printing with an AMS or tool changer. Download STL, or 3MF from 3DPEA if you want to keep the parts in one project.
Direct extrusion has two weaknesses. Edges follow pixels, so small logos come out with visible stair-steps, and anti-aliased edges can create thin fringes. Use the largest, sharpest source image you have, and flatten it to pure black and white before uploading.

Route two: vectorize, then import
For anything you'll print larger than a coaster, or anything with lettering, convert the PNG to SVG first. Free tracers in Inkscape (Trace Bitmap) and many online tools do this. Check the result: every shape should be a closed path, and there should be no stray specks. Then import the SVG into Tinkercad. Its help center says it supports vector files such as SVG, not JPG, PNG or GIF. After import you can adjust the scale, and the shapes become solids with a default height. Set the height, add a base plate from the basic shapes, group, and export STL.
In Autodesk Fusion for personal use, import the SVG onto a sketch plane, then extrude the closed profiles. This is the right route if the sign needs countersunk screw holes, a stand or an exact fit in a frame, because you can dimension everything.
Size features for your nozzle
Most failed logo prints aren't conversion problems; the features are simply too small to print. A 0.4 mm nozzle lays down lines roughly 0.4 to 0.45 mm wide, so any stroke narrower than two lines is unreliable.
| Feature | Minimum for a 0.4 mm nozzle | Comfortable size |
|---|---|---|
| Raised line or stroke width | 0.8 mm | 1.2 mm or more |
| Gap between raised parts | 0.5 mm | 1.0 mm or more |
| Lettering cap height (raised) | 4 mm | 6 mm or more |
| Base plate thickness | 1.6 mm | 2 to 3 mm |
| Raised height above base | 0.6 mm | 1 to 2 mm |
| Keychain hole diameter | 3 mm | 4 to 5 mm, with 2 mm of material around it |
A worked example: a house number sign
Say you want a 150 x 60 mm sign reading "1428". Start with a black-on-white PNG of the digits in a bold font, trace it to SVG, and import into Tinkercad. Scale the digits to 40 mm tall, which gives strokes of about 5 to 6 mm in a bold typeface, well above the 0.8 mm minimum. Add a 150 x 60 x 3 mm box as the base, place the digits on top, and set them 2 mm tall. Add two 4 mm holes 10 mm in from each end for screws. Group and export. In the slicer, print the base in one color and pause at the layer where the digits begin to swap filament, which gives a two-color sign from a single-nozzle printer.
Keychains, cookie cutters and stamps
Keychains need a hole with at least 2 mm of material around it and a total thickness of 3 to 4 mm to survive daily use. Cookie cutters are an outline extrusion: a 0.8 to 1.2 mm wall, about 12 to 15 mm tall, with a wider flange at the top for pressing. Rubber-stamp masters must be mirrored before export. All three start from the same vector route above.
When the picture shows an object, not a logo
Extrusion only turns outlines into flat solids. A photo of a lamp extruded this way gives you a lamp-shaped cookie, not a lamp. For real objects, use an AI image-to-3D tool. For furniture and home objects, FurniMesh (furnimesh.com), which our team makes, generates the full model from one photo, and our photo to printable model guide walks through it.
Choosing a typeface for printed lettering
Typeface choice decides whether small text survives the printer. Bold sans-serif faces print best, because their strokes are even and wide. Thin serifs, hairline strokes and script fonts with fine connecting lines fall below the 0.8 mm minimum quickly at small sizes. As a rule of thumb, if the thinnest part of a letter is less than a fifth of the letter's height, print it larger or pick a heavier weight. Counters, the enclosed spaces in letters such as "a", "e" and "8", close up when the gap gets under about 0.5 mm, so open the letter spacing slightly for small signs. Recessed (engraved) text is more forgiving than raised text, because the nozzle never has to build a free-standing thin wall; if a nameplate must be small, engrave the letters 0.6 to 1 mm deep instead of raising them.
Keep going
The other guides on this site, each on a separate step of the image-to-print process.
How to turn a photo into a lithophane STL
Image prep, thickness, shape and print settings with real numbers.
Object photoPhoto to a 3D printable model with AI
The FurniMesh workflow for furniture and home objects, then a repair checklist.
RoundupBest free image to STL tools
What each free tool really does, its limits and where the catch is.
Print prepPreparing AI-generated meshes for printing
Watertight, scale, wall thickness and hollowing, with worked numbers.